APF's VaporSolve™ Moisture Remediation Systems are highly specialized epoxy coating systems formulated to isolate moisture sensitive flooring from all levels of concrete moisture. VaporSolve™ systems are used when concrete has a known moisture problem, when concrete dries too slowly to meet the construction schedule, and as a preventative measure when concrete doesn't have a vapor retarder in place and future moisture conditions cannot be predicted. Benefits include:
- Effective with all levels of concrete moisture intrusion
- Guaranteed adhesion over silicate contaminated concrete
- May be applied to freshly poured concrete
- More than 20 million sq. ft. covered with 99% success
To learn more about concrete moisture- including slab design, the importance of a vapor retarder, accurate moisture remediation and moisture control - see the APF white paper, Understanding Concrete Moisture.
APF VaporSolve™ Basic SystemGREEN SYSTEM
The VaporSolve™ Basic System consists of a single coat of VaporSolve 100, a 100% solids epoxy. This system is applied at 16 mils over concrete that hasn’t been contaminated with reactive silicate curing compounds or densifiers.
APF VaporSolve™ Fresh Concrete SystemGREEN SYSTEM
The VaporSolve™ Fresh Concrete System uses a unique, water-based epoxy formulation to bond to six to 24-hour-old concrete. It virtually eliminates the evaporation of water from the top of the slab, serving as the ultimate curing compound.
APF VaporSolve™ Ultra SystemGREEN SYSTEM
The VaporSolve™ Ultra System consists of a water-based epoxy as a primer that gives deeper penetration and better adhesion when applied to silicate-contaminated concrete, as well as a finish coat of VaporSolve 100, which greatly reduces the possibility of concrete outgassing.